Multi-use Sports & Play

Exercise and Sport are indispensable activities for young and old alike to compensate for stress at School and Work.

Multi use sports and play solutions

Rubbertech Sport Step provides an excellent surface for multi use sports areas giving excellent weathering resistance, abrasion resistance and protection against sports and play injuries.

The tiles are manufactured from bonded rubber granulate and have high elasticity which make them ideal surfacing for Football, Basketball, Street Hockey and Volleyball as well as peripheral around Table Tennis tables etc.

  • Excellent abrasion resistance
  • Outstanding ball rebound properties
  • Cushioning for Player's ligaments and joints
  • Sound deadening of 23 dB
  • Easy on neighbours' nerves
  • Integrated connector pins
  • Line application on surface is easy to carry out
  • Easy cost efficient installation
  • Available in 4 Colours (Red, Green, Black & Grey)

Rubbertech Sport Step Pavement Slabs

Material: Bonded Rubber Granulate To be installed over concrete and asphalt substructures only
Slab Dimensions (mm) / Weight Kg/unit (approx.): 500 x 500 x 30mm / 6.6 Kg
500 x 500 x 40mm / 8.9 Kg
1000 x 500 x 40mm / 17.9 Kg
Dimensional tolerances in accordance with DIN ISO 7715, Part 2, Class M3
Qty. Required units / M²: 4
4
2
500 x 500 x 30
500 x 500 x 40
1000 x 500 x 40
Ball Rebound: 95 % Test procedure: DIN 18032, Part 2
Colours:

Red, Green, Black & Grey

Slight material-related colour variations possible

 

Edge Slabs

Material: Bonded Rubber Granulate To be installed over concrete and asphalt substructures only
Slab Dimensions (mm) / Weight Kg/unit (approx.): 1000 x 250 x 40/10mm / 6.2Kg Dimensional tolerances in accordance with DIN ISO 7715, Part 2, Class M3
Ball Rebound: 95 % Test procedure: DIN 18032, Part 2
Colours: Red, Green, Black & Grey Slight material-related colour variations possible

 

Corner Slabs

Material: Bonded Rubber Granulate To be installed over concrete and asphalt substructures only
Slab Dimensions (mm) / Weight Kg/unit (approx.): 1250 x 250 x 40/10mm / 6.8Kg Dimensional tolerances in accordance with DIN ISO 7715, Part 2, Class M3
Ball Rebound: 95 % Test procedure: DIN 18032, Part 2
Colours: Red, Green, Black & Grey Slight material-related colour variations possible

 

Installation

Pour level layer of lean concrete or crushed rock over frost-stable sub grade. If the surface covered is an existing concrete or asphalt surface, take care to provide sufficient slope for water drain-off and level off any irregularities with stone chippings (grain size 0 - 3 mm). Use edge slabs and corner slabs around the surface to minimize danger of stumPlayground tilesbling. Glue these slabs to one another, to the Pavement Slab surface and if possible to the substructure. Install the slabs in a masonry-type configuration, i.e. beginning every second row with a half slab. Insert connector pins fully into the receiving holes. To ensure secure placement, glue the crosswise joints of the first and the last row. The glue used should be a 1-component PU adhesive glue. Cut slabs to size using a powered sabre saw. To ensure secure placement, glue the crosswise joints of the first and the last row. The glue used should be a 1-component PU adhesive glue. Cut slabs to size using a powered sabre saw.